18:32
With the increasing need for food and reduction in arable pieces of land, the use of irrigation farming is increasing. We have many types of irrigation systems available depending on need and budget of the farmer. Among these is pulse irrigation.
This is a type of irrigation that makes it possible to manage your water usage. It can be scaled to whatever flow one requires so as to greatly minimize water flow. It can be used with sprinkler or drip irrigation very effectively. The traditional low flow systems and even ultra low flow systems of irrigation can be used with this pulse system.
For areas with very scarce water like in the deserts, this system has proven to be effective in saving water while satisfying the plants. The operation works by allowing water to passively flow into a reservoir at controlled rate. This builds pressure steadily till it reaches a predetermined level. The pressure then forces open the outlet valves and a pulse of water goes out.
As the reservoir pressure reduces, the valves close giving the reservoir time to recharge. As long as the inlet is kept lower than outlet, the cycle of recharge and discharge will be kept going. A drip flow controller is used in this system to regulate the water flow rate into the reservoir.
This low flow pulse system can operate without monitoring for a long period of time. This saves the farmer from overwatering the plants. Engaging in this constant, frequent and controlled irrigation reduces water demand and lowers usage by a large margin. It also reduces water stress on plants as they have a period when there is no water flow as the pressure builds in the reservoir.
Basically, this system operates by the strong magnets that attaches to the outlet valve. These holds it closed as the pressure builds. When it is strong enough, the reservoir pressure forces the top magnets open. As the pressure reduces, it drops down thereby closing the valve again allowing the recharging to start.
Using this on a sprinkler system is very effective for open farming. When seeds are germinating, one can use a frequency of 5 second sprinkling every minute for the first 2 weeks. This can then be adjusted to 8 hours sprinkling three times a week. This frequency is determined by plant water need, weather condition and the strength of the sun in that season.
The advantages of using this pulse irrigation system are numerous. When used for drip and sprinkler systems, there are no run off on if using heavy soil. In sandy soil, you have no leaching and water is not lost even though sand has low water retention capabilities. In hilly areas and shallow soil, water can still be applied efficiently without any run off. Temperature control can be achieved through evaporative cooling by use of the intermittent sprinkling and use of foggers. Given the very low discharge rate, growing plants in containers or greenhouse will require less space. It allows for the use of lower capacity pumps and smaller conduits hence reduced system costs in general.
This is a type of irrigation that makes it possible to manage your water usage. It can be scaled to whatever flow one requires so as to greatly minimize water flow. It can be used with sprinkler or drip irrigation very effectively. The traditional low flow systems and even ultra low flow systems of irrigation can be used with this pulse system.
For areas with very scarce water like in the deserts, this system has proven to be effective in saving water while satisfying the plants. The operation works by allowing water to passively flow into a reservoir at controlled rate. This builds pressure steadily till it reaches a predetermined level. The pressure then forces open the outlet valves and a pulse of water goes out.
As the reservoir pressure reduces, the valves close giving the reservoir time to recharge. As long as the inlet is kept lower than outlet, the cycle of recharge and discharge will be kept going. A drip flow controller is used in this system to regulate the water flow rate into the reservoir.
This low flow pulse system can operate without monitoring for a long period of time. This saves the farmer from overwatering the plants. Engaging in this constant, frequent and controlled irrigation reduces water demand and lowers usage by a large margin. It also reduces water stress on plants as they have a period when there is no water flow as the pressure builds in the reservoir.
Basically, this system operates by the strong magnets that attaches to the outlet valve. These holds it closed as the pressure builds. When it is strong enough, the reservoir pressure forces the top magnets open. As the pressure reduces, it drops down thereby closing the valve again allowing the recharging to start.
Using this on a sprinkler system is very effective for open farming. When seeds are germinating, one can use a frequency of 5 second sprinkling every minute for the first 2 weeks. This can then be adjusted to 8 hours sprinkling three times a week. This frequency is determined by plant water need, weather condition and the strength of the sun in that season.
The advantages of using this pulse irrigation system are numerous. When used for drip and sprinkler systems, there are no run off on if using heavy soil. In sandy soil, you have no leaching and water is not lost even though sand has low water retention capabilities. In hilly areas and shallow soil, water can still be applied efficiently without any run off. Temperature control can be achieved through evaporative cooling by use of the intermittent sprinkling and use of foggers. Given the very low discharge rate, growing plants in containers or greenhouse will require less space. It allows for the use of lower capacity pumps and smaller conduits hence reduced system costs in general.
About the Author:
If you require more info on pulse irrigation don't hesitate to check our website now! View the related homepage by clicking on this link http://pulsecaremedical.com right away.
0 comments:
Post a Comment